KNX system The building automation
KNX systems are a solution for the intelligent management of commercial buildings. For more comfort, more safety and more energy savings.
With 15 years of KNX bus product accumulation, GVS can provide a full set of devices and solutions, covering smart screens/panels, actuators, sensors, smart gateways, system devices, etc.
Self-developed and certified 3 KNX protocol stacks
KNX-0705(Base Protocol Stack)
KNX-07B0 (Senior Protocol Stack)
KNX-07B0-Secure(Security Protocol Stack)
Video intercom system
Products
KNX CO2 sensor,55mm is mainly applied in building control system, connected to the bus via KNX connection terminals and installed together with other devices on the bus to become a system.
3.3-inch touchscreen with 3 physical buttons, catering to different user interaction preferences.Adhering to the design style of "screen-key integration" of the Waltz Smart Touch+ Pad.
10.1" IPS touch panel,resolution 1280*800, aluminum faceplate, ambience LED strip, built-in temperature sensor. Full KNX functions with list-view or map-view, full intercom functions, 48V PoE, connect IP camera.
7-inch IPS display with 1440*790 resolution. Pure touch panel or extendable with buttons/knob.Supports Wi-Fi connection for OTA update, standard SIP video intercom.
Both inside and outside repair, is not only the art on the wall, but also a powerful smart home control center, integrated with the vast majority of control functions.
5" IPS touch panel, resolution 480*854, aluminum faceplate, built-in temperature & proximity sensor, vertical/horizontal adjustable.
4" IPS touch panel, resolution 480*480, aluminum faceplate, built-in temperature & proximity sensor. Full KNX functions: 9 control pages including switch, dimming, shutter, scene control, value sending
Replaceable mechanical metal/plastic buttons, built-in temperature sensor, 2-fold input(Binary or NTC), RGB color LED indicator. Full KNX functions including switch, dimming, shutter,scene control, value sending
LCD display, resolution 240*240, built-in temperature & Humidity sensor, 2-fold input interfaces. It can be used as push button sensor/multifunction thermostat/audio control. For push button control
Elegant glass touch buttons, metal frame, blue/yellow color LED indicator. Full KNX functions including switch, dimming, shutter, scene control, value sending.
Built-in temperature & humidity sensor, 2 external inputs of dry contact or NTC temperature detection. Support control modes: heating/colling, with 2/4-pipe system
Classic plastic push button, laser printed paper for icons or description, built-in temperature sensor. Full KNX functions including switch, dimming, shutter, scene control
16A or 20A/channel, un rated voltage 250V AC, 50-60Hz, high-current magnetic relay, max. switching current 20A switch/heating actuator operation mode.
16A/channel, un rated voltage 250V AC, 50-60Hz, high-current magnetic relay, max. switching current 20A switch/heating actuator operation mode.
6A/channel, un rated voltage 250V AC, 50-60Hz, total current of 3 channels less than 12A. Main KNX functions including switch, status response, scene control
6A/channel, un rated voltage 250V AC, 50-60Hz, high-current magnetic relay, max. switching current 16A. Main KNX functions including, switch, status response, scene control
10A/channel, un rated voltage 250V AC, 50-60Hz, high-current magnetic relay, max. switching current 16A. Main KNX functions including, switch, status response, scene control
Output in 0-10V or 10A/105uF. Max. DC current switching capacity 16A/30V DC, 230V AC drive and 24V AC with 0-10V drive interface; three-wire PT1000 temperature sensor Interface.
Supports 24V AC or 230V AC thermal drive. 6 independent valve outputs, Max. 300mA/channnel. 6 channels of room temperature controller
Max. load 300W/channel, leading edge phase control, un rated voltage 250V AC, 50-60Hz. KNX functions including switch, relative & absolute dimming, status response, scene control
4 independent outputs, each with 1 changeover contact (UP/DOWN mechanically interlocked), Max. switching current 6A resistive, 370W Motor. Shutter/ Blind working mode, scene control
Constsant voltage drive mode, input 12-24V DC, rated current 4A, RGBW control. KNX functions including swicth, relative & absolute dimming, status response, scene control
Passive DC 0/1-10V drive mode, switch current 16A /250V AC, no additional voltage input. KNX functions including swicth, relative & absolute dimming, status response, scene control
Dali telegram broadcast function, fault detection of lamps and ballasts of DALI devices. Max.64 DALI devices can be controlled (switch, dimming, brightness) each fold, 16 group control, 16 scene control.
Can be individually configured per input (4) & LED output(4), bus length≤10M, input 20V DC, output 5V DC. Main KNX functions including switch, dimming, shutter control, scene control, value sending,couter, multiple operation.
Can be individually configured per input (4/8) & LED output(4/8), bus length≤10M, input 20V DC, output 12V DC.Main KNX functions including switch, dimming, shutter control, scene control, value sending, RGB, shift register,multiple operation
Can be individually configured per input (4/8/16) , bus length≤100M, input 20V DC. Main KNX functions including switch, dimming, shutter control, scene control, value sending, RGB, shift register,multiple operation
Input 0-265V AC/DC, max. 2mA, 0-3V for "0", 9-265V for "1", cable length ≤100M (1.5mm2). Main KNX functions including switch, dimming, shutter control, scene control, value sending, switching sequence
Input voltage 95V-255V AC, 50/60Hz, output 1: 30V DC +1/-2V, SELV with choke; output 2: 30V DC +1/- 2V,SELV without choke, total 640mA, short-circuit-protection. Current level indicator.
RJ45 socket for10/100Base-T, IEEE 802.3 network, auto sensing, remote programming. Project management, support 4 local clients & 1 KNXnet/IP Device Manager.
RJ45 socket for10/100Base-T, IEEE 802.3 network, auto sensing, support max. 5 clients. Support KNX IP Secure, No need auxiliary power.
USB Standard 2.0, max. cable length 5m from PC.
Input voltage 95V-255V AC, 47-63Hz, output 1: 30V DC +1/-2V, SELV with choke; output 2: 30V DC +1/- 2V,SELV without choke, total 640mA, short-circuit-protection.
Can be used as line coupler, backbone coupler or line repeater, filter table for line-crossing telegrams. Installation: DIN-rail Mounted
Telegram tunneling and routing, can be used as a line coupler, backbone coupler to connect several TP areas or different TP installation systems via Ethernet.
App for remote control of KNX system, works on iOS and Android mobile/tablet/PC, support remote control under LAN, 4G, 5G.
Work as a KNX/ZigBee Gateway pro, upload KNX devices to Tuya platform for management, support KNX functions including lighting, curtain control, scene control, temperature control, AC, background music,
By defaut it contains 1 fold of KNX/RS485 converter. Another 3 folds of KNX/RS232 or KNX/RS485 converter boards can be added to form a device with flexible folds of 1RS485 + (1~3) RS485/RS232.
Switch relay 4 * 16A,21 * 6A; 1 folds AC/Dry contact shutter, 2 folds TRIAC dimming, 3 folds 0-10V dimming, 1 fold fan coil actuator with 0-10V output valve, 1 fold IP protocol, 5 folds of dry contact/binary input/LED output.
Switch relay 4 * 16A, 6 * 10A; 2 folds dimmer 1-10V, 1 folds AC/Dry contact shutter, 1 fold fan coil actuator, 20 dry contact, 1 fold RS485 Protocol Conversion, I fold KNX/IP Protocol Conversion. Installation
